This article was originally distributed via PRWeb. PRWeb, WorldNow and this Site make no warranties or representations in connection therewith.
SOURCE: Outwater Plastics + Architectural Products by Outwater
Outwater’s Movable LED Wafer Puck Track Lighting System is the first ever lighting specifically designed to change with varying lighting requirements by enabling the user to create adjustable linear illumination by simply sliding the system’s puck lights into any position along its low profile track.
Bogota, NJ (PRWEB) June 21, 2012
Have you ever wished that you could readily accommodate your most immediate needs for lighting by effortlessly relocating your cabinet’s, counter’s or showcase’s existing, permanently fixed LED puck lights to other more suitable locations, or perhaps, merely add additional puck lights to adapt to your ever changing needs, but have reluctantly opted not to do so because you could not justify the amount of time and effort that would be needed to run new wires and reinstall the puck lights in applications that might only be temporary?
In response to a recent market survey, whereby Outwater [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC] posed this question to its top lighting products customers, Outwater is pleased to introduce its Movable LED Wafer Puck Track Lighting System, the first ever lighting that was specifically designed to change with varying lighting requirements by enabling the user to create adjustable vertical or horizontal linear illumination by simply sliding the system’s puck lights into any position along its low profile track.
Comprising Outwater’s integrated “LED Diamond Light Technology,” which produces pure, bright, white LED lighting with the highest Color Rendering Indexes and tightest Binning Codes on the market, the Movable LED Wafer Puck Track Lighting System’s diminutive 2-1/8-inch diameter, ¼-inch thick puck light operates by means of two very small protruding tabs incorporated on the puck light’s underside, which serve both to conduct power to the puck light itself as well as to permanently or temporarily affix it by means of a simple twist to its power source, an adhesive backed track, which is offered in 3-foot, 4-foot, 6-foot and 12-foot lengths along with complementary jumper cables that enable shelf to shelf lighting connections.
Manufactured with constant voltage technology so as to minimize power losses, the Movable LED Wafer Puck Track Lighting System’s ultra energy efficient 12-volt, 21 LED chip puck light, which is offered in Cool White (Color Temperature: 6,500k; Lumens: 100; Color Rendering Index: 80) and Warm White (Color Temperature: 3,000k; Lumens: 95; Color Rendering Index: 85) formats, is similar in illumination to much higher wattage lighting of comparable media, yet only consumes a few watts per unit, with an approximate 30,000 hour bulb life. Furthermore, not only can up to 27 of the system’s puck lights be powered off of one transformer, no heat emissions or generated UV radiation render the Movable LED Wafer Puck Track Lighting System’s puck lights safe and ideal for a variety of residential and commercial applications.
About Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC:
Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC can be contacted Toll Free at 1-800-631-8375 (For sales and product information in the USA & Canada) / 1-201-498-8750 (For sales and product information outside of the USA & Canada) or viewed online at http://www.outwater.com
From the vendor of a single product in August 1972, Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC, with sales and distribution facilities in New Jersey and Arizona, are recognized today as well established international manufacturers and stocking distributors of more than 65,000 standard and innovative component products required by woodworkers, cabinet and furniture manufacturers, builders, remodelers, designers, architects, point-of-purchase and display fixturing manufacturers, OEM's, as well as a very diversified range of other commercial and retail end users.
Major Product Categories include Plastic & Aluminum Extrusions; Lighting and Lighting Accessories; Furniture, Cabinet & Store Fixture Components; Knobs & Pulls; Casters; Fasteners; Laminates; The FOGA Exhibit & Display Fastening System; The Klem Connector; Literature Displays; Slatwall; Sign Holders; P.O.P Components; Display Motors & Turntables; Pedestals; Injection Molded Parts; Brass Tubing & Fittings; Surfacing Materials; Interior & Exterior Polymer & Wood Architectural Mouldings & Millwork; ORAC DECOR and DEM Architectural Mouldings & Millwork; Columns & Capitals; Balustrading; Wrought Iron Components; Decorative Stamped Steel & Polymer Ceiling Panels; Wainscoting; Wall Coverings; Fireplace Surrounds; Plastic "Glass" Block; Plaster Architectural Elements; Period & Contemporary Hardware; Kitchen & Bath Accessories; Kitchen & Bath Cabinetry and Vanities… and so much more!
Joey Shimm, Director of Marketing
Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC
For the original version on PRWeb visit: http://www.prweb.com/releases/prweb2012/6/prweb9621379.htm